Click for more products.
No produts were found.
Trouver un produit (684 products)

Categories level 4

Create quotation from my cart
Reference: SG-135

The pair of aerator diffusers (Ref. SG-135) from Sécurigaz screws onto all the brand's eyewash spray headers. Equipped with a limescale-resistant plastic micro-perforated screen, these removable diffusers deliver an extremely gentle and highly aerated low-pressure water stream, specially designed to effectively rinse eyes and delicate facial tissue without risk of causing further ocular injury. Offered in a Safety Yellow RAL 1016 finish, these aerators include a rubber gasket and a plastic nut.

Reference: SG-123A136AC

The Sécurigaz complete brass eyewash spray manifold (Ref. SG-123A136AC) is coated with an acid-resistant polyamide resin finish (250–300 microns). It features removable anti-scale aerators that deliver a low-pressure, aerated water flow that is very gentle on the eyes. Equipped with yellow (RAL 1016) self-ejecting dust caps, it ensures a water jet that complies with EN 15154 and ANSI/ISEA standards.

Reference: SG-123A136TI

The Sécurigaz 304 stainless steel eyewash spray manifold (Ref. SG-123A136TI) is designed to provide effective and safe emergency rinsing of the face and eyes. Equipped with removable anti-scale aerators, it distributes an aerated, low-pressure water flow that is very gentle on the face and eyes. Its stainless steel structure has a spacing of 190 mm and features ultra-light, self-ejecting dust caps. This equipment complies with EN 15154 and ANSI/ISEA standards.

Reference: SG-148/2

The 2-outlet handheld eyewash (Ref. SG-148/2) from Sécurigaz is a safety device for the immediate rinsing of eyes and face in the event of chemical splashes. Designed to be connected to a flexible hose, it is instantly activated by simply pressing its steel trigger. Its double spray head delivers perfectly aerated, gentle water at low pressure, with a regulated flow rate of 22 l/min, while automatically ejecting its protective dust caps. Coated with an acid-resistant, high-visibility yellow polyamide resin, it complies with international standards EN 15154-2, ANSI ISEA Z358.1, and DIN 12899-3.

Reference: SG-346A

The aluminum control paddle (Ref. SG-346A) from Sécurigaz is specially designed for frost-protected safety equipment adapted to high and low temperatures (models SG-4253, SG-39102, and SG-39104). Please note: it is compatible exclusively with the valve reference SG-400. Made of aluminum and coated with a high-resistance polyester resin 250-300 microns thick, it features the safety yellow color RAL 1016 (identical for all Sécurigaz equipment).

Reference: SG-Bloc4220

The Bloc 4220 (Ref. SG-Bloc4220) from Sécurigaz is a complete pre-assembled factory unit, specially designed for SG-4220 combination showers. Ready for installation, this monobloc assembly integrates the essential water distribution components: the eyewash feed block, an intermediate connector, a 1/2" valve, and a manual control paddle. This turnkey industrial solution guarantees perfect sealing and considerably simplifies assembly and replacement operations in the event of an emergency.

Reference: SG-146FP

The aluminium control paddle (Ref. SG-146FP) is specially designed for activating Sécurigaz frost-protected safety showers and eyewashes. Ideal for extreme environments (high and low temperatures), it is made of aluminium and coated with a protective layer of polyester resin (250 to 300 microns thick). Its high-visibility yellow color (RAL 1016) ensures immediate identification in the event of an emergency.

Reference: SG-402

The 1"1/4 automatic draining valve (Ref. SG-402) is specifically designed for opening and closing Sécurigaz platforms. Manufactured from stainless steel and galvanized steel, it features a gravity purge system that ensures the complete and automatic draining of the piping in 6 to 8 minutes after each use via a light trickle of water. Thanks to its anti-clogging design, it maintains perfect operation even after long periods of inactivity and over 100,000 cycles of use.

Reference: SG-100SS

The 304 stainless steel shower head (Ref. SG-100SS) is designed to deliver a wide, aerated water flow perfectly compliant with current safety standards. Thanks to its double-cone distribution design, it prevents water flow restriction caused by limescale buildup, thereby guaranteeing constant efficiency in case of an emergency. With a diameter of 26 cm, it features a standard 1" female connection (adapters provided for older 1"1/4 models, please contact us).

Reference: SG-400

The 1"1/4 stainless steel valve (Ref. SG-400) is specially designed for opening and closing Sécurigaz low-temperature safety combination units (models SG-39102 and SG-39104). Thanks to an ingenious gravity purge system, it ensures the complete and automatic draining of the piping in just 6 to 8 minutes after each use via a light trickle of water. Designed to resist clogging, this ultra-robust stainless steel valve maintains perfect operation even after long periods of inactivity and is certified for over 100,000 cycles of use.

Reference: SG-145

The SG-145 1/2" eye wash valve is a chrome-plated steel or all-stainless steel ball valve, specifically calibrated for emergency eye wash equipment. With a total length of 68 mm, it features 1/2" female threaded connections. This model integrates a water flow regulator adjusted to 22 l/min and is ideally used at a recommended pressure of 2 bars (with an operating range from a minimum of 1.5 bars up to a maximum of 8 bars).

Reference: SG-108

The SG-108 1" shower valve is a ball valve designed for emergency safety showers. Available in chrome-plated brass or all-stainless steel, it features a flow regulator calibrated at 110 l/min to guarantee effective and compliant body rinsing. This model is equipped with 1" female threaded connections for a total length of 90 mm. It is optimized to operate at a recommended pressure of 2 bars (tolerating a minimum of 1.5 bars and a maximum of 8 bars).

Reference: SP-S-2251

The Speakman Icon™ SP-S-2251 showerhead combines durability and performance thanks to its solid brass construction, which is durable and corrosion-resistant. Featuring the patented Anystream® system, it incorporates 8 nozzles resistant to scale buildup, providing 64 spray channels and 3 adjustable spray patterns. It features a 1/2"-14 NPTF connection.

Reference: SP-S-2252

The Speakman Icon SP-S-2252 showerhead features 48 individual sprays that can be customized by simply rotating the handle in either direction. Its sleek, compact design is engineered to optimize water pressure, delivering remarkably powerful performance. Its solid brass construction and corrosion-resistant finish ensure lasting durability and a great appearance over time. Several flow rates are available, from 1.75 to 2.5 GPM (6.6 to 9.5 L/min), as well as different finishes.

Reference: SP-VS-3010

Featuring 45 individual sprays paired with 12 center massage jets, the Neo SP-VS-3010 hand shower provides a complete and versatile shower experience. Simply rotate the spray face in either direction to easily switch between the three spray patterns: Intense, Massage and Combination. The Neo hand shower features a corrosion-resistant finish and comes with a 1.52 m (5’) metal shower hose.

Reference: SP-S-3010

A clean design with perfectly balanced geometric lines, combined with meticulous engineering: the Speakman Neo SP-S-3010 shower head is designed to be as beautiful as it is high-performing. Featuring 45 individual sprays paired with 12 center massage jets, the Neo shower head delivers a complete and versatile shower experience. Simply rotate the spray face in either direction to easily switch between the three spray patterns: Intense, Massage and Combination. The Neo shower head features a corrosion-resistant finish.

Reference: EU-SP-6700.4

The Haws EU-SP-6700.4 in-wall mounting plate is made of high-strength steel with a thickness of 4.7 mm (3/16"). It provides reinforced wall support for the installation of dual, two-level (“Hi-Lo” / bi-level) drinking fountains. Installed in-wall before the wall finish is completed, it is pre-drilled and tapped to ensure quick, stable and perfectly aligned installation of both basins. Supplied complete with threaded studs, nuts and mounting washers.

Fiche_technique_0011.png

Reference: EU-3511

The Haws EU-3511 outdoor drinking fountain combines a classic, antique-style design with a robust cast aluminium construction and a black powder-coated finish. Its dual-height drinking bowls improve accessibility for users, including people with reduced mobility. Equipped with vandal-resistant components, push-button controls and lead-free water pathways, it is ideal for public spaces and outdoor areas.

Fiche_technique_0011.png

Reference: EU-3511FR+6518.2FR

The Haws EU-3511FR+6518.2FR outdoor drinking fountain combines a robust cast aluminium structure with a black powder-coated finish and two stainless steel drinking bowls at different heights, improving accessibility for people with reduced mobility. Its freeze-resistant pneumatic valve system, installed below the frost line, allows year-round use, even in freezing temperatures. Equipped with vandal-resistant components, it is ideal for parks, schools and public spaces.

Fiche_technique_0011.png

Menu

Settings

Create a free account to use wishlists.

Sign in